Secret And Patter To Prepare

Special Thimble Holder: Take a strip of cardboard long enough to cover four thimbles and wide enough to be bent over the top of the thimbles. Sew four pockets of black elastic tape to hold the thimbles. These must be large enough to allow inserting of thimbles easily and tight enough to hold them securely until needed. Sew a thread from the bottom of the cardboard to the edge of the top to hold top down in place. The purpose of this top is to keep thimbles from pushing out when fingers are inserted. Figure 11 shows front of holder. Figure 12 shows side view of end.

Brass or other metal may be used for this holder. Holes must then be punched in the metal through which to sew the elastic.

Sometimes the holder is omitted entirely and elastic tape is sewn to form pockets for thimbles on under side of vest and coat.

Sew a special holder under left side of vest. Have front end of holder about four inches from front edge of vest and about half an inch above lower edge of vest.

Arrange all holders with openings of thimbles down so that fingers can be inserted in thimbles by curling them under edge of vest or coat.

Under right edge of vest place another holder or sew black elastic tape to vest with pockets for three thimbles. The space between the two end thimbles should be about 2-1/4 inches. A small thimble for little finger should be inserted in right end of this holder and a regular size thimble in the forward pocket.

At left front edge of vest between second and third buttonholes, sew a small pocket to hold a thimble on the under side. You may use an elastic pocket here also. Insert a thimble with open end toward edge of vest so that it can be removed when finger is inserted.

Figure 13 shows the arrangement of thimbles which you have now under your vest. One thimble in a little pocket under the left edge between second and third buttonholes. Three thimbles in a holder under the right lower edge--a small size thimble on the right end of holder. Four thimbles in a holder under left lower edge.

Figure 13 shows the arrangement of thimbles which you have now under your vest. One thimble in a little pocket under the left edge between second and third buttonholes. Three thimbles in a holder under the right lower edge--a small size thimble on the right end of holder. Four thimbles in a holder under left lower edge.

Figure 14 shows position of thimbles and holders under vest.

Under left edge of your coat sew a thimble holder to accommodate five thimbles. Place this about four inches from front edge and about 3/4 of an inch up from lower edge of coat. At rear end of holder insert RED thimble, then small thimble, then three regular thimbles.

Place holder in such position that when arm drops naturally to side, left fingers can curl up under coat and remove thimbles easily on finger-tips.

Have a special holder for four thimbles in similar position on right side under edge of coat.

Figure 15 shows arrangement of thimbles and holders under coat. A holder with five thimbles under left edge—a holder with four thimbles under right edge.

Enneagram Essentials

Enneagram Essentials

Tap into your inner power today. Discover The Untold Secrets Used By Experts To Tap Into The Power Of Your Inner Personality Help You Unleash Your Full Potential. Finally You Can Fully Equip Yourself With These “Must Have” Personality Finding Tools For Creating Your Ideal Lifestyle.

Get My Free Ebook


Post a comment