Working With Balloons

Balloons break. Even the most expert balloonist breaks an occasional balloon while twisting it to make a figure. Don't be afraid to crive the balloons a good twist. But be o o careful when blowing up balloons. Cup the palm of your hand over the top of the balloon as you blow into it. That way, if the balloon pops, your eyes are protected from any flying pieces that may snap back at you. When you are twisting the balloon, you should also keep it far away from your face to avoid any similar accidents.

Also, this may seem obvious, but you'll probably want to have short fingernails if you are going to make these creations. Use a nail file to round off rough edges of your nails. Some professionals use a squirt of hand cream to soften their hands before twisting balloons. Other balloon artists use a dab of talcum powder on the outside of their balloons. The theory behind the powder it that it makes it easier to perform some of the balloon twists. But talcum can also make it harder to perform certain twists because vou will not be able to get a good

grip 011 the balloons. You don't need to dust your creations with powder. It will take some time, but soon you will be able to twist and turn your way to a perfect sculpture.

Sometimes you may find it difficult to hold more than one balloon at a time. Ask a friend to hold one end of the balloon while you twist and turn the other balloons.

Finally, remember that practice makes perfect. It's difficult to be able to twist balloons to be exactly the same size. The more you work at the creations, the easier it will be to make the designs.

Was this article helpful?

0 0

Post a comment